Please feel free to refer back to these instructions if you need to double-check settings or adjust the volume level of the mic. You are now set to use your USB microphone with the recording software of your choice! Then click “OK” to close out of the Sound window. Click “Apply” and “OK” to close out of the Microphone Properties window. Select the levels tab to adjust the microphone’s audio level.Ĩ. You may also right-click on the microphone and select “Properties.”ħ. Then click the “Properties” button at the bottom right of the window. Please note: If you are using an AT2020USB+ or AT2020USBi, the mic may be labeled as such.Ħ. If it is not, simply click on the mic to select it, and then click “Set Default” at the bottom of the screen. Select the Recording tab, and make sure the microphone is set as the default device with the green check mark. Make certain the green check mark is next to your computer’s internal speakers, indicating they are set as the default playback device.ĥ. Right-click on the speaker icon and select “Sounds.”Ĥ. It is often located at the bottom right of the screen.ģ. Locate the speaker icon in the task bar on your computer. The microphone’s blue LED light will illuminate, indicating the mic is receiving power.Ģ. Connect the microphone to your computer’s USB port using the provided USB cable. Please refer to the photos and follow the steps below to properly set up your USB microphone with your PC. Question: How do I set up my Audio-Technica USB microphone with my PC?Īnswer: The setup of an Audio-Technica USB microphone may seem like a daunting task, but fear not! There are only a few settings you need to configure before you begin recording and podcasting.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |